Roll over the thumbnails above to see larger images.
1085R CRUZ-AIR
Customize the 1085R to meet your working range
requirements with a variety of boom and stick
combinations, including auxiliary hydraulics, magnet
generator, stick extension attachments, brush cutters,
and hydraulic grapple and boom configurations to reach
up to 40'.
Equipped with rubber tires, the machine can be transported to a job site on its own power, thus
eliminating the need for an additional transport truck
and trailer. Standard 4-wheel steering and 28,000 lbs.
of drawbar pull makes mounting the excavator to the
rail easy.
Machine controls are conveniently arranged,
ergonomically correct and responsive to ensure
safe, easy one-man operation on and off the rail
in a spacious and comfortable cab.
Long-life and easy-to-service hydraulic system offers
you more up time. Dash mounted service indicators
promote easy routine service functions.
FEATURES
Advanced hydraulics
Dual flow hydraulics with one variable and two fixed displacement pumps provide high efficiency, fuel economy and excellent digging performance.
Stopping power
Fast, dependable, hydraulic-powered disc brakes on each wheel gives the Cruz-Air the power to stop when needed. Park safely with the spring-applied, hydraulically released parking brake located on the rear drive shaft. The working brake is automatically applied during dig function and automatically releases when the creep function is activated by the push of a button.
More bucket and stick digging power
The Cruz-Air has outstanding performance for this class of wheeled excavator. Maximum bucket breakout force is rated at 23,298 lbf. The stick breakout force is rated at 15,596 lbf and can get over 30' surface reach and nearly 19' digging depth with a 22' loading height. Easy to work under and around obstacles with Extenda-stick®, without blocking more than one lane of traffic.
Improve your bottom line
Highest travel speed and gradeability of any wheeled excavator. Quick 29 mph travel speed gets you to the job faster. Eliminates the need and expense to lowboy it from one worksite to another. Less travel time to the job, more productivity on the job and more profit to your bottom line.
The 95% gradeability gives you 50% more off-road tractive effort that other wheeled excavators can’t match. Four 17.5” x 25” tires, 16” high ground clearance, longer wheelbase and full-time 4-wheel drive with torque proportioning differentials enable you to get unmatched rough terrain performance in all types of adverse ground conditions. For more traction, optional automatic limited slip or driver-controlled locking differentials are available. Do more jobs faster with confidence.
Fast, easy servicability
All daily maintenance points are accessible from ground level. Vandal resistance covers provide easy access to engine components and filters for fast inspection and replacement. Outboard planetaries also simplify servicing. Available central lube system further protects your investment.
Exceptional operator comfort
The big, deluxe operator’s cab gives a “platinum” level of comfort for all-day operation. Spacious and ergonomically designed, the easy-access cab features a plush, fully adjustable suspension seat with armrests. Totally integrated pilot-operated joysticks, with low operating forces and short stroke control bucket, swing, boom and stick functions. A tilt, telescoping steering column has automotive style controls for increased operator convenience. New cluster instruments and gauges continually monitor machine operation status. Panoramic windows give excellent visibility while loading and working in tight conditions. The new sound suppression provides a quiet environment that promotes more productivity. The optional hydraulic heater and air conditioner maintains a comfortable climate control at the flip of a switch. Floor and wall carpeting create a pleasing work platform.
Positive controls of swing mechanism
A high torque gear motor powers the swing mechanism with 24,884 lb./ft. torque, providing 360° continuous swing with an automatic swing brake for positive drift control.
Options make a great machine even better
Customizations can make your 1085R the most versatile machine on your fleet. Options include railroad grapples, rail tongs, rail threaders, dozer blade, special railroad paint schemes, hydraulic thumb, mowers, six buckets and more.
The power to perform
The 4-cylinder, 160 HP, Tier 3 Cummins turbocharged diesel engine provides the right power to weight ratio for long life and exceptional reliability, plus automatic engine deceleration and three power mode settings. Powerful 160 net horsepower (119kw) and 460 lb./ft maximum torque (624Nm) gives the power needed to deliver the performance you want when you need it.
Matched with a 6-speed Clark electric powershift transmission and converter, the Cruz-Air has the power and speed ranges to smoothly perform all kinds of excavator and lifting tasks with ease and keeps your operating costs down.
Stability and flexibility
You get both with Cruz-Air outriggers. Equipped with two front and rear standard outriggers, each is individually controlled from the cab with a quick five-second lowering and raising time. No need to add the cost of blades for stability — it’s built in! Optional wide-stance outriggers are also available for material handling applications. The Cruz-Air also includes front axle oscillation lock.
Incredible versatility
This is no single-purpose machine. The exclusive Extendastick ® hydraulic telescoping stick adds 5' for deeper digging. The stick also allows you to work closer to the machine with the Extenda-stick® retracted. The Wrist-O-Twist® gives the operator the ability to sculpt 45° in each direction from the center for increased digging and grading. The exclusive quicklatch attachment, that is standard on the Wrist-O-Twist®, makes quick work of installing or removing attachments to use on different jobs. No pins to remove, no tools required and the attachments can be changed in a matter of minutes; another great time saver exclusive to the Cruz-Air. Auxiliary hydraulics enable you to quickly install grapples, rippers, mowers, brush cutters and augers. This versatility is available only on the Cruz-Air. It will save you time and money. You get more from the Cruz-Air because of all the attachments, buckets and stick options that are available to extend the work and range of this versatile excavator.
Attachments & options
The following attachments and options are available at an extra charge.
Please contact us for a quote.
Single 4 cylinder diesel engine with a minimum of SAE Gross 160 BHP & 119kW @ 2200 RPM, EPA Tier 3 Compliant diesel,
Ability to run on B20 Bio-diesel fuel
24, 30 or 36 inch digging bucket with teeth, extra set of bucket pins, and quick release
60 inch ditch forming bucket with extra set of bucket pins, and quick release
Hinged wire guard cover for cab to meet or exceed SAE J1084 specs
Heavy Duty dozer blade attachment on working end of machine
Slashbuster Model XL480-S, mulching brushcutter mower. 48" swath, 90 degree tilt mount (Wrist-O-Twist® supplied above) auto wire shear,
rotating hub debris guard, blade bar assembly, cab mounted control for forward, neutral, reverse gears, integration with excavator
progressive link thumb (Badger’s) mulches material up to 6")
Brontosaurus Model E. 2.0 Mower, cutter, mulcher, 12 knife machine
Fixed dipper stick in various lengths (not extendable)
Boom to come with four foot hydraulic controlled fold under jib attachment
West Coast heated mirrors
Keyed alike locking compartment covers and fluid fill caps
Slow moving vehicle emblem
Tool Box
Pintle hitch, frame mounted, one each end of machine
On-site training for operations and maintenance
Perimeter night lighting package to light the area around the machine to a distance of 20 feet and 360 degrees
Special paint options
Railroad grapple with rotator
Lift brackets
Hydraulic Thumb
12 volt outlets in cab
Engine block heater
Windshield washer
Rubber Street pads (2 ea.)
AM/FM radio/CD
Magnet
10KW genset & wires for magnet
Car coupler with air(each)
Hydraulic breaker hammers
Rail tongs
Rail threader
Extended warranty
Model 1085R SPECIFICATIONS
Axles Torque proportioning (high traction) differential. Front: Planetary, steering, axle oscillates and is equipped with oscillation lockouts. Rear: Planetary, steering axle with parking brake.
Tire Size
Standard 17.5 – 25, 16PR; Optional 17.5 – 25, 20PR,
Super Ground Grip; Optional 17.5 R 25, Michelin XHAT*
Travel Speeds (Forward and reverse)
Unit equipped with 17.5 – 25 tires.
Gear Ratios
High
Low
1st
mph
6.7
3.1
(km/h)
(10.8)
(5.0)
2nd
mph
12.7
5.9
(km/h)
(20.4)
(9.5)
3rd
mph
29.1
15.8
(km/h)
(46.8)
(25.4)
Drawbar Pull
Gear Ratios
High
Low
1st
ibf
12,016
27,856
(kN)
(53.4)
(123.9)
2nd
ibf
5,705
13,805
(kN)
(25.4)
(61.4)
3rd
ibf
1,477
4,339
(kN)
(6.6)
(19.3)
3% grade speed (max) 12.4 mph (20.0 km/h)
Brakes Service: Hydraulic dry disc on each wheel, foot operated; Parking: Spring applied, hydraulic released. Located on rear
driveshaft Working: Hydraulic at each wheel. Hand operated.
Maximum Gradeability (Paved Surface)
With no load and 17.5 – 25 tires 95% Note: Gradeability is a measure of tractive effort only and does not represent grades on which the machine can operate.
Operating Weights Standard excavator with rigid dipper, 17.5 – 25, 16 PR tires, std. cab with heater, rear (std.) outriggers, 60" (1.5 m); Ditching bucket, Wrist-O-Twist®, full fuel. 175 lb. (79kg) operator; 42,980 lb. (19,470 kg); Standard excavator with Extenda-Stick®, 17.5 – 25, 16 PR tires, std. cab with heater, front and rear (opt.) outriggers, 36" backhoe bucket, full fuel, 175 lb (70 kg) operator: 42,260 lbs. (20,050 kg)
Standard Equipment
Enclosed, total vision, vandal-resistant cab. Tinted windows. Adjustable bucket seat. Cab controls for all operations. Signal horn. Windshield wipers. 13'8" (4.2 m) grading and excavation boom. Fast hoist, crowd and tool. Swing brake. Positive oil cooler. Hydraulic oil filters. Hydraulic rear outriggers. Hydraulic service and working brakes. Parking brake – spring applied, hydraulic-released, on drive shaft. Turn signals. Head and taillights. Four-wheel drive. Planetary axles. Front-2 wheel steering, 4 wheel steering, and crab steering. 17.5 – 25, 16 PR tires. Power shift transmission, forward and reverse. Torque converter. Torque proportioning differentials. Electric engine hour meter. Fuel gauge. Dry-type air cleaner. Cold weather start kit. Remote boom and swing lubrication. Master battery disconnect switch. Back-up alarm.
Optional Equipment
15' (4.6 m) rigid dipper. 15' (4.6 m) Extenda-Stick® dipper, 17.5 – 25, 20 PR super ground grip tires. 17.5 R 25 XHAT* (Michelin) tires. Hydraulic front outriggers. Secondary steering. Upper vandal cover. Cab heater; LP gas. Excavator boom work light package. Tool box. Windshield washer. Pintle hitch. Wrist-O-Twist® with quick latch. Various buckets (See list.) Lift lugs. Auxiliary hydraulic controls. (See complete list on Attachments tab.)
Buckets
Nominal
Bucket
SAE Capacity
Width
Weight
(struck)
In. (mm)
Lb. (kg)
yd3 (m3)
General Purpose
24"(610 mm)
925 lb (420 kg)
0.37 yd3 (0.28 m3)
30" (762 mm)
1,030 lb (467 kg)
0.50 yd3 (0.38 m3)
36"(914 mm)
1,130 lb (513 kg)
0.62 yd3 (0.47 m3)
42" (1,067mm)
1,235 lb (560 kg)
0.74 yd3 (0.57 m3)
Ditch Forming
60" (1,524mm)
1,005 lb (456 kg)
0.63 yd3 (0.48 m3)
72" (1,829mm)
1,075 lb (488 kg)
0.75 yd3 (0.57 m3)
Front Loading
60" (1,524mm)
1,626 lb (738 kg)
1.5 yd3 (1.15 m3)
Concrete Removal
48" (1,219 mm)
1,850 lb (839 kg)
NA
Note: For heaped capacities, add approx. 20%
Operator’s Cab
All controls for both the lower and upper works are located in a single, all-steel, weatherproof cab. Windshield of tinted, tempered glass slides open and is stored in an up-and-over position. Side and rear windows are of tinted Lexan. Separate hand controls for digging and parking brakes, swing brake, ignition, directional lights, engine throttle and lock, and steering reversal are all standard controls in the cab. (Operator controls can be interchanged to satisfy techniques of most operators).
Engine Make and model: Cummins QSB4.5-Tier3, turbocharged; Number of cylinder: 4; Bore and stroke: 4.21 x 4.88"
(107 x 124mm); Displacement: 275 in3 (4506cm3); Fuel supply: High pressure; Air Cleaner: Dual stage, dry-type; Oil filter: Renewable cartridge: Lubrication: Positive pressure; Cooling system: Pressurized radiator and lubricated bearing impeller pump; Horsepower; SAE Gross: 160 (119 kW) @
2200 rpm. Torque, max. (SAE): 460lb –ft (624Nm) @ 1500rpm
Hydraulic System Pumps: One fixed displacement gear pump for the crowd circuits @ 52 gpm (197L/min). A tandem fixed displacement gear pump section for the hoist circuits @ 52 gpm (197L/min.) and one variable displacement pump section for the steering, brakes and pilot circuits @ 0 to 26 gpm (98 L/min.) Main relief valve pressure setting: 2650 psi (18,271 kpa) Oil Cooler: Positive radiator type hydraulic oil cooler Control Valves: Quantity: 2; Type: Sectional – 2 spool; Functions controlled: Hoist, crowd, tool, swing and 2 auxiliary. Cylinders: Double-acting hydraulic for hoist, crowd, outriggers,steering and optional equipment.
Hoist: 6.5 x 55.4" (165mm x 1.41 m)
Dipper, backhoe 6.5x50.8" (165mm x 1.29m)
Tool: 5.5 x 37.5" (140 x 953 mm)
Outriggers (2 std, 4 opt.) 5.5 x 7.5" (140 x 445mm)
Extenda-Stick® (opt.): 4x60" (102mm x 1.52m)
Wrist-O-Twist® (opt.): 4x7.5" (102 x 191mm)
Single-acting hydraulic cylinders for axle oscillation lock.
Axle-lock (2): 3.5 x 5.35: (89 x 136 mm
Due to continued design improvements, all specifications are subject to change.
illustrations show Extenda-stick® dipper
with wrist-O-Twist®
and Ditching bucket
The Working Range
table
also includes
other configurations.
Boom/Bucket
Configuration
Boom Type
Rigid
Extendastick®
Extendastick®
Bucket Type
Excavator
Excavator
Ditch & Wrist-O-Twist®
Boom Length
Fixed
Extended
Retracted
Extended
Retracted
AA
Maximum reach at grade level
30'6" (9.30m)
30'7" (9.32m)
25'6" (7.77m)
30'8" (9.35m)
25'7" (7.80m)
AB
Maximum digging depth (tip of teeth)
18'10" (5.74m)
18'10" (5.74m)
13'10" (4.22m)
18'11" (5.77m)
13'11" (4.24m)
AC
Maximum depth of cut for 8" (2.44m) of level bottom
18'5" (5.61m)
18'5" (5.61m)
13'3" (4.04m)
18'6" (5.64m)
13'4"(4.06m'")
AD
Minimum radius of 8' (2.44m) level bottom at depth AC
6'2" (1.88m)
6'2" (1.88m)
6'2" (1.88m)
6'2" (1.88m)
6'2" (1.88m)
AE
Radius of maximum digging depth
10'2" (3.10m)
10'2" (3.10m)
10'2" (3.10m)
10'2" (3.10m)
10'2" (3.10m)
AM
Boom length (boom pivot to dipper pivot)
13'8" (4.17m)
13'8" (4.17m)
13'8" (4.17m)
13'8" (4.17m)
13'8" (4.17m)
AN
Dipper length (dipper pivot to bucket pivot)
15'0" (4.57m)
15'0" (4.57m)
10'1" (3.07m)
15'0" (4.57m)
10'1" (3.07m)
AP
Bucket tooth radius (bucket pivot to tip of teeth
4'1" (1.24m)
4'1" (1.24m)
4'1" (1.24m)
4'2" (1.27m)
4'2" (1.27m)
AR
Dipper pivot angle
116°
117°
117°
117°
117°
AS
Bucket pivot angle
171°
169°
169°
169°
169°
BB
Maximum height of working equipment
29'9" (9.07m)
29'10" (9.09m)
27'4" (8.33m)
30'6" (9.30m)
28'0" (8.53m)
BC
Maximum bucket teeth height
29'5" (8.97m)
29'5" (8.97m)
26'9" (8.15m)
29'10" (9.09m)
27'4" (8.33m)
BD
Minimum clearance of fully curled bucket at maximum boom height
22'3" (6.78m)
22'4" (6.81m)
19'10" (6.05m)
22'4" (6.81m)
19'10" (6.05m)
BE
Minimum clearance of fully curled bucket to mximum boom height
1'11" (58.m)
1'11" (58.m)
6'11" (2.11m)
0'9" (23.m)
5'9" (1.75m)
BH
Radius of bucket teeth at maximum height
23'7"(7.19m)
23'9" (7.24m)
19'5" (5.92m)
23'4" (7.11m)
19'0" (5.79m)
BK
Maximum working equipment radius, boom at maximum height, dipper fully retracted
13'6" (4.11m)
13'6" (4.11m)
13'3" (4.04m)
13'11" (4.24m)
13'7" (4.14m)
BL
Maximum height of working equipment with dipper fully retracted<
20'5" (6.22m)
20'5" (6.22m)
20'5" (6.22m)
20'5" (6.22m)
20'5" (6.22m)
BQ
Boom pivot angle
81°
81°
81°
81°
81°
Lift Capabilities
NOTES: an * indicates a capacity that is limited by stability. Values are based on a standard excavator with 30” (0.76 m) excavating bucket, 9068 lb. (4113 kg) counterweight for Rigid Stick and 11964 lb. (5427 kg) counterweight for Extendastick with rear outriggers in use on a firm, level surface. Rated loads do not exceed 87% of hydraulic capacity nor 75% of stability. All specifications comply with SAE J1097.
